S200E Digital Indicator The S200E is a general purpose, "no
frills" digital indicator housed in a standard black ABS
enclosure. It comes with a large (.6") green LED screen for
easy readout of up to 50,000 display divisions, and supplies
enough current for up to four 350-ohm load cells. All setup
parameters may be entered via the front panel keys.
The S200E uses full duplex RS-232 serial format
for communication with many types of attached support
equipment. The unit can transmit data on demand, or
continuously in a popular data protocol to match a wide
variety of printers, remote displays, or personal
computers.
Dimensions
Applications
Standard Features
-
High Quality / Low Cost
-
NTEP Approved for 5,000 divisions
-
Full Duplex RS-232 Serial Port
-
Easy to Read LED Display
-
Displays up to 50,000 graduations
-
Drives up to four 350-ohm Load Cells
-
Full Front Panel Configuration
-
Stainless Steel Swivel Stand
-
Operates on AC Adapter or Car Battery
Specifications
Load Cell Excitation:
+10 VDC
Load Cell Current:
Drives up to four
350-ohm load cells
Analog Signal Input Range:
0.2 mV/V
min to 3.0 mV/V max
Analog Sensitivity:
0.4 micro
volt/grad, minimum
1.0 micro volt/grad recommended minimum
for Legal-for-trade
A/D Conversion Rate:
Up to 25
meas/sec
A/D Resolution:
Up to 260,000 internal
counts
Display:
0.6", 5 1/2 Digit LED
Display Resolution:
Up to 50,000
external grads, selectable
Key Functions:
LB/kg, Zero, Net/Gross,
Tare, Print
Annunciators:
Gross, Net, kg, LB,
center of zero, stable, tare, negative
Serial Port:
Full duplex RS-232
format
Power Requirements:
12 VDC, 650 mA
Wall Adapter, included
Power Consumption:
80 mA +
30mA/350-ohm load cell
Operating Temperature:
10° C to 40° C
(-14° F to 104° F)
Indicator Dimensions:
3.2" x 6.8" x
2.3" (81 mm x 173 mm x 57mm)
Warranty:
1 year limited warranty
applies
NIST Classification:
H-44 Class III at
5,000 divisions
C.O.C. # 95-006
Price - $275.00
| 