Floater Crane Scale

Wireless Solutions for Oilfield Applications

We have been a leader in wireless weighing technology for a number of years. From crane scales to tension link loadcells, we have made them all wireless. Below are some of the options that you as the consumer has when purchasing a Sidewinder.

Typical Configurations: Sidewinder

The configurations shown below will work with either the Sidewinder deadline tension sensor, or our power tong tension link loadcells.

Wireless loadcell to handheld readout.

Wireless loadcell to handheld readout. Optional RS-232 port from readout into PC or PLC.

Regular loadcell hardwired into standard digital indicator.

$3,595.00 includes TI500 readout

Wireless loadcell to reciever unit that connects to PC's or PLC's via RS-232 interface.

Floater:

The Floater 2000 Crane Scale provides “In Line” lifting or cable tension measurement… without cutting cable!

Overview:

The Massload Floater makes it possible to measure running or static cable tension. The roller configuration causes a very slight deflection in the cable. Increasing the load or tension causes a corresponding and linear increase in force on the ML600 double ended shearbeam. The Loadcell signal is converted to weight by the Digital readout.

Cable Sizes Supported:

1/2" – 1 1/2"

A 60ft conductor cable is provided with each floater to connect it to the recommended indicator – the Df2000. If a wireless solution is required, see our wireless floater

$1,995.00

The Massload Foater is a cable tension monitor and is designed as a safety device, not a legal for trade weigh scale.